Flow Meter Avery Hardoll


Flow meter Avery Hardoll adalah salah satu flow meter solar yang cukup terkenal dalam dunia industri, adapun flow meter Avery Hardoll ini buatan Inggris.

Flow meter Avery Hardoll ada beberap series/type, yaitu Mechanical bulkmeters BM series, Mechanical bulkmeters CM series dan Steel Case Bulkmeter DM series.

Untuk informasi lebih jauh dan harga terbaru untuk flow meter Avery Hardoll, jangan segan-segan untuk menghubungi kami.

Untuk informasi lebih jauh spesifikasi dari masing masing series, silahkan anda lihat di produk di bawah ini.


Mechanical bulkmeters BM series

CONSTRUCTION

MANIFOLD : Fabricated steel or ductile iron (ductile iron not available on triple capsule meters)
BODY: Ni-Resist cast iron
VANES: Carbon
ROTOR: Aluminium or Ni-Resist cast iron
OUTER COVERS: Aluminium or Ni-Resist cast iron
INNER COVERS: Ni-Resist cast iron
BEARINGS: Stainless steelSEALS: High nitrile or fluorocarbon

Maximum working pressure: 10.5 bar (150 psi)
Test pressure: 21 bar (300 psi)
Temperature range: -28ºC to 100ºC
Volume per revolution: 2.27 litres (single capsule)4.54 litres (double capsule)6.82 litres (triple capsule)
Repeatability typically: .02%

Size : 2,5" ~ 6"

Catalog Download Here 

 

Mechanical bulkmeters CM series

CONSTRUCTION

CONSTRUCTIONMANIFOLD: Ductile iron (single/double capsule) Fabricated steel (all builds) Cast Aluminium (6’’ Triple only)
BODY: Ni-Resist cast iron
VANES: Carbon
ROTOR: Aluminium or Ni-Resist cast iron
COVERS: Carbon Steel
IBEARINGS: Stainless steel
SEALS: High nitrile or fluorocarbon

Maximum working pressure: 10.5 bar (150 psi)
Test pressure: 21 bar (300 psi)
Temperature range: -28ºC to 100ºC
Volume per revolution: 2.27 litres (single capsule) 4.54 litres (double capsule) 6.82 litres (triple capsule) 9.08 litres (4 capsule) Repeatability typically: .02%

Size : 2,5" ~ 8"

Catalog Download Here 

 

Mechanical bulkmeters DM series

CONSTRUCTION

BODY: Carbon steel - ASTM 216 WCBEND
COVERS: Carbon steelROTOR: Aluminium alloy
VANES: Carbon
BEARINGS: Non corrodible stainless STEEL
SEALS: High nitrile or fluorocarbon

SPECIFICATION

MAX FLOW RATE: 2500 lpm Continuous 3000 lpm Intermittent
FLANGES: 4" ANSI 150
MAX WORKING PRESSURE: 10.5 bar (150psi)
TEST PRESSURE: 21 bar (300psi)
TEMPERATURE RANGE: -28º C TO 100º C
VOLUME PER REVOLUTION: 5.75 LITRES
TURN DOWN RATIO: 10:1LINEARITY WITHIN: + 0.15%REPEATABILITY BETTER THAN: 0.02%
WEIGHT (WITH TRANSMITTER): 70kg

Catalog Download Here 



Your IP Address is: 54.196.2.131
Copyright © 2017 Glodok Tools. Powered by Safety Online
We Accept